La Crosse Technology CA84688 Faqs page 11

8. °F will flash. Press and release the + or - button to select Fahrenheit or Celsius.
Confirm SET button and select MPH or KMH for wind speed.
9. MPH will flash. Press and release the + or - button to select MPH or KMH wind speed units.
Press the SET button to confirm and exit.
 This station has manual set time.
 Use the Program Menu to set time.
The Wind speed station predicts weather condition of the next 12-hours based on the change of
atmospheric pressure with 70-75% accuracy.
Note: As weather conditions cannot be 100% correctly forecasted we are not responsible for any
loss caused by an incorrect forecast.
Animated Forecast Icons:
 Sunny
 Partly Sunny
 Cloudy
 Rain
 T-Storm
 Snow
Note: The "snow" icon appears when the temperature is below 32°F (0°C) and the forecast is rainy
or stormy.
 The Wind speed station calibrates barometric pressure based on its location over a period to
generate an accurate, personal forecast. Please allow 7-10 days for barometer calibration.
 The forecast station samples the barometric pressure every twelve minutes. These samples
are averaged hourly and daily then stored in nonvolatile memory.
 IMPORTANT: As the Wind speed station builds memory, it will compare the current average
pressure to the past forty day average pressure for increased accuracy. The longer the Wind
speed station operates in one location the more accurate the forecast icons will be.
 Install fresh alkaline batteries with correct polarity.
WEATHER STATION IS BLANK: NO LETTERS, NUMBERS OR DASHED LINES
 Check that the batteries connect correctly.
 Batteries may be overpowered or underpowered.
 Remove batteries from Wind speed station.
 Press any button 20 times. Leave the batteries out of the Wind speed station for 2 hours.
La Crosse Technology, Ltd.
TIME IS INCORRECT
FORECAST ICONS INACCURATE
Page 11