Miele KM 7404 FX Operating And Installation Instructions page 80

Installation
Disconnecting from the mains

Risk of electric shock.
There is a risk of electric shock if the
appliance is connected to the mains
supply during repair or service work.
After disconnection, ensure the
appliance cannot be switched back
on by mistake.
To disconnect the appliance from the
mains power supply, do one of the
following depending on installation:
Safety fuses
 Completely remove fuses.
Automatic circuit breakers
 Press the (red) test button until the
middle (black) button springs out.
Built-in circuit breakers
 Circuit breakers at least type B or C:
Switch the lever from 1 (on) to 0 (off).
Residual current device (RCD)
 Switch the main switch from 1 (on) to
0 (off) or press the test button.
80
Mains connection cable
The hob must be connected to the
electrical supply with a special
connection cable, type H 05 VV-F (PVC
insulated) with a suitable diameter.
Please see wiring diagram for
connection.
See the data plate on the hob for the
correct voltage and frequency.
Connecting the mains cable

Danger of electrical shock.
The mains connection cable must
only be fitted by a suitably qualified
and competent person.
If the mains cable needs to be replaced
it must be replaced with a special
connection cable, type H 05 VV-F (PVC-
insulated), available from your Miele
dealer.