Osd Function; To Use The Menus; Main Menu - ViewSonic NX1940w User Manual

OSD Function

To use the menus

1. Press the MENU button to display or close main menu.
2. Use the cursor up/down to select a menu item.
3. Use the cursor left/right to enter a submenu or enable/disable the function.
4. Press the MENU button to exit the menu.

Main Menu

Press the MENU button to enter the main OSD (On Screen Display). Adjust the items
including Picture Setup, Sound setup, Function Setup and TV setup. When the input
source is AV/S-VIDEO /SCART/YPbPr/ PC/ HDMI mode, only the Sound Setup, Picture
Setup and Function Setup can be selected; shown in the figure below:
When the input source is TV mode, the Sound Setup, Picture Setup, Channel select
Setup, Function Setup and TV Setup can be selected; shown in the figure below:
Sound Setup (Same as in TV/AV/S-VIDEO /SCART/YPbPr/ PC/ HDMI)
1. The range of adjusting volume, bass and treble is from 0~100.
2. Bass and Treble: the easy Equalizer function, Bass can adjust the low frequency
sound and Treble can adjust the high frequency sound.
16
ViewSonic NX1940w/NX2240w