The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE). The mark indicates the requirement NOT to dispose the equipment as unsorted municipal waste, but use the return and collection systems according to local law. ViewSonic NX1940w/NX2240w...
17. The equipment shall be used at maximum 40°C ambient temperature. 18. Protect equipment from humidity. 19. An approved power cord greater or equal to H05VV-F, 3G, 0.75mm2 must be used. 20. The mains plug is used as the disconnecting device and shall remain readily operable. ViewSonic NX1940w/NX2240w...
0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight. ViewSonic Proposed Maximum Concentration 0.1% 0.1% 0.01% 0.1% 0.1% Actual Concentration < 0.1% < 0.1% < 0.01% < 0.1% < 0.1% < 0.1% NX1940w/NX2240w...
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
ViewSonic® does not recommend the use of any ammonia or alcohol-based cleaners on the LCD TV screen or case. Some chemical cleaners have been reported to damage the screen and/or case of the LCD TV. ViewSonic will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.
Getting Started Congratulations on your purchase of a ViewSonic LCD TV display. Important! Save the original box and all packaging material for future shipping needs. Package Contents AV cable (For Asia use) Power cord (For Asia use) Power cord (For UK use)
Avoid heat, direct sunlight and exposure to rain or water. The equipment shall not be exposed to dripping or splashing. 2. Insert the aerial plug firmly into the aerial socket ANT IN 75Ω at the back of the TV. 19” 22” ViewSonic NX1940w/NX2240w...
5. Turn the TV on: Press the power button of the TV to turn it on. When the TV is ON, the indicator turns green. If the TV is in power off, the indicator in front of the TV illuminates amber. ViewSonic NX1940w/NX2240w...
(or MENU button). MENU Press this key to display or exit main menu. MUTE Temporarily interrupt the sound or restore it. NICAM To select Mono/ Stereo/Dual from TV RF input. POP, SWAP, Position,GUIDE is not available on this model. NX1940w/NX2240w...
Use the COLOURED BUTTONS to operate the Teletext screen. PAGE SELECTION Page can be selected in two ways. a. Press ▼or ▲ to increase or decrease the page number. b. Input the page number by digit buttons 0~9. ViewSonic NX1940w/NX2240w...
3. Fasten four units M4.0 X 10mm screws to secure the wall mount bracket. Note: If you want to wall mount the TV, for the safety of you and the appliance, please use the correct hanging brackets. (Wall mounting brackets are not included when you purchase the TV) ViewSonic (19”) (22”) NX1940w/NX2240w...
Press MENU button more than 5 seconds can lock or unlock the function of MENU button. There is a wide range of video and audio equipment that can be connected to your TV. The following connection diagrams show you how to connect them. ViewSonic NX1940w/NX2240w...
4: TV signal input 5: SCART signal input 6: Left audio track input 7: S-Video signal input 8: VGA input or YPbPr signal input 9: HDMI input 10: VGA audio input or YPbPr audio input 11: AC power input terminal ViewSonic NX1940w/NX2240w...
Page 16
Select the T-Line button, change source button can come into HDMI source. 3. The HDMI connectors allow the following TV and monitor display mod: SDTV 720x576i, 50Hz /720x480i, 60Hz EDTV 720x576p 50Hz /640x480p 60Hz HDTV 1920x1080i 50/60Hz 1280x720p 50/60Hz VGA 720x480 60Hz NX1940w/NX2240w...
Page 17
5> Audio Input: Connect the audio signal source. (PC, DVD player, Laser Disc player, video cassette recorder or camcorder) to the Audio Input ports. 6> Video Input: Connect the video signal source. (PC, DVD player, Laser Disc player, videocassette recorder or camcorder) (The audio is for S-Video and AV) ViewSonic NX1940w/NX2240w...
Sound Setup (Same as in TV/AV/S-VIDEO /SCART/YPbPr/ PC/ HDMI) 1. The range of adjusting volume, bass and treble is from 0~100. 2. Bass and Treble: the easy Equalizer function, Bass can adjust the low frequency sound and Treble can adjust the high frequency sound. ViewSonic NX1940w/NX2240w...
Page 19
8. Reset to default: Reset the sound setting to the factory default value. Picture setup When the input source is in TV/AV/S-VIDEO /SCART/ YPbPr/ HDMI, you can select Brightness, Contrast, Colour, Sharpness, Dyn. Colour Temp, preset and Reset to default respectively; shown in the figure below: ViewSonic NX1940w/NX2240w...
Page 20
TV channel number; when OSD is set to OFF, the input source or the TV channel number will disappear. 2. OSD language setting: There are ten languages option provided - English, French, German, Spanish, Russian, Italian, Finnish, Swedish, Danish, Norwegian. ViewSonic NX1940w/NX2240w...
Page 21
Timers and Reset to default; TV setup The following menu appears only in the TV mode. A. channel select function This set can give the user a channel list that all channel received B. channel setup function ViewSonic buttons. NX1940w/NX2240w...
Page 22
7. Skip can be set to ON or OFF. When it is set to ON, a channel can be skipped by pressing the CH button on the remote control or on the front panel. 8. Reset to default: Reset to the factory default value. ViewSonic NX1940w/NX2240w...
At the end of its life specialized companies can dismantle the discarded receiver to concentrate the reusable materials and to minimize the amount of materials to be disposed of. Please ensure you dispose of your old receiver according to local regulations. ViewSonic NX1940w/NX2240w...
(Share with PC Audio ) D-sub ) HDMI x 1 Analog: D-Sub 15 pins (separate) DDC 2B Analog: 1440x900 (60Hz) Used as a stereo earphone mini jack (3.5 ø) Headphone: Mini-jack for stereo (3.5ø) 100-240V ~50/60Hz Power-on<65W; Power saving-off<2W 478mmx406mmx209mm NX1940w/NX2240w...
Page 25
D-sub ) HDMI x 1 Analog: D-Sub 15 pins (separate) DDC 2B Analog: 1680x1050 (60Hz) Used as a stereo earphone mini jack (3.5 ø) Speaker (built-in): 2*3 watt speakers Headphone: Mini-jack for stereo (3.5ø) 100-240V ~50/60Hz Power-on<75W; Power saving-off<2W 539mmx447mmx209mm NX1940w/NX2240w...
• Ensure that the video cable is securely connected. color, or color • The picture may appear dim in a brightly lit room. misalignment • Adjust brightness, contrast, saturation (color), and tint referring to the user guide. • Check the input signal setting. ViewSonic NX1940w/NX2240w...
Page 29
*You can still use the buttons at the front of your TV. *Select the TV mode to be sure your remote control is in the TV mode. *Remove plug from mains for 5 seconds then replug to power on again. ViewSonic NX1940w/NX2240w...
An on-screen listing of feature controls shown on the TV screen that are made available for user adjustments. Radio Frequency or modulated signal design used as the carrier for television broadcasts. Sleep Timer Function with which you can set a time period after which the TV should turn itself off. ViewSonic NX1940w/NX2240w...
Replacement product or parts may include remanufactured or refurbished parts or components. How long the warranty is effective: ViewSonic LCD TVs are warranted for one (1) year for all parts excluding the light source and one (1) year for labor from the date of the first customer purchase.