Setting the Reel Speed
To achieve a consistent, high quality of cut and a
uniform after-cut appearance, it is important that you
set the reel speed controls (located under the seat)
correctly. Adjust the reel speed controls as follows:
1.
Select the height of cut at which the cutting units
are set.
1. 8-blade reel adjustment
2. 11-blade reel adjustment
2.
Choose the desired ground speed best suited
for conditions.
3.
Use the graph on the reel speed chart decals
(Figure 34
and
proper reel speed setting.
Figure 34
Model 03820
3. Read the Operator's Manual for information on adjusting the
reel.
27
Figure
35), to determine the
decal121-7884