Advertisement
KB200 BUNGEE CORD REPLACEMENT INSTRUCTIONS
Items Included:
Bungee Cord
1. Unlock and open the liner dispenser lid to
expose the liner dispenser cavity.
2. If the old bungee cord is still in place remove it
along with any liners in the cavity.
3. On the left and right sides of the liner dispenser
cavity there are keyhole slots. Take the new
bungee cord and insert one of the metal tabs at
the ends of the bungee cord into one of the slots.
Twist the bungee cord so that the metal tab is
horizontal across the inside of the slot and pull it
up to the top of the slot.
4. Repeat the process for the opposite side
ensuring that you keep tension on the first side
while you install the second side.
5. Once both sides are secure, pinch the middle
of the bungee cord together to create a loop. Pull
the loop towards the top of the liner dispenser
and insert it over the recessed tab between the
liner cavities.
6. Fill the liner cavities with new liners, close and
lock the liner dispenser lid. Close the unit.
Koala Kare Products ǁ 6982 S Quentin St. ǁ Centennial, CO 80112
®
Toll Free: 888.733.3456 ǁ 303.539.8300 ǁ Fax: 303.539.8399
www.koalabear.com
P/N 481-KIT
Bungee
Keyhole
slot
Keyhole
slot
Bungee
P/N 359 December 2010
Advertisement
