Advertisement
Available languages
Available languages
Quick Links
KB101
® ®
Hardware Included:
Phillips Pan Head Machine Screws (2pc)
Tools Required:
Phillips Head Screwdrive
1. Open Baby Changing Station. Remove
the screws that secure the old strap to the
unit. Discard old strap and screws.
2. Position the new strap on the unit with
the buckle towards the right hand side of
the unit.
3. Take one of the screws provided and
insert it through the hole in the chafe tab
and into the hole in the right hand side of
the bed. Secure the screw into the screw
insert.
4. Repeat step 3 for the other end of the
strap by securing it to the left hand side of
the bed.
5. Ensure that the strap is buckled. Clean
up mess and close unit.
Koala Kare Products
6982 South Quentin St., Centennial, CO 80112-3945
KB111
Replacement Strap Instructions
&
r
A Division of Bobrick
Main 303.539.8300 Toll Free 888.733.3456
Koalabear.com
Fax 303.539.8399
P/N 889-KIT
Advertisement
Related Manuals for Koala Kare 889-KIT
Summary of Contents for Koala Kare 889-KIT
- Page 1 KB101 KB111 Replacement Strap Instructions & ® ® P/N 889-KIT Hardware Included: Phillips Pan Head Machine Screws (2pc) Tools Required: Phillips Head Screwdrive 1. Open Baby Changing Station. Remove the screws that secure the old strap to the unit. Discard old strap and screws.
- Page 2 Instrucciones para KB101 KB111 & Reemplazar la Correa ® ® P/N 889-KIT Herraje Suministrado: Tornillo Triafondo Cabeza Plana Phillips (2) Herramientas necesarias: Destornillador de estrella 1. Abra la base del cambiador de pañales. Quite los tornillos que aseguran la correa vieja a la unidad.
- Page 3 Instructions de Remplacement KB101 KB111 & de la Sangle ® ® RÉF. 889-KIT Visserie Fournie: Vis de machine de tête de casserole de Phillips (2) Outils nécessaires: Tournevis cruciforme 1. Ouvrez la table à langer. Retirez les vis servant à fixer l’ancienne sangle à la table.
- Page 4 KB101 KB111 & Anleitung zum Austauschen des Gurtes ® ® P/N 889-KIT Befestigungsmaterial beiliegend: Kreuzschlitz-Flachkopf-Schrauben, US- Metallgewinde (2) Erforderliche Werkzeuge: Kreuzschlitzschraubendreher 1. Babywickeltisch bis zur Horzontal-Lage aufklappen. Die zwei alten Gurthälften mittels Lösen der alten Schrauben entfernen. Gurt und Schrauben entfernen.