View Photos - ViewSonic VS12075 Quick Start Manual

View Photos
From the main screen, press the Up and Down navigation keys to select
PHOTO, then select the photo source you want to display.
Photos pre-stored in the device will appear when no memory card or USB
flash disk is connected.
When photo source is selected, press OK to switch between 3 view modes:
Browse mode: manual viewing of photos one-by-one
•
• Thumbnail mode: list of all photos
When viewing photos in Thumbnail mode, hold the Down navigation
key for 2 seconds then release to quickly enter the setting menu for
photo-related settings, or press View on the remote control.
Slideshow mode: automatically shifting display of photos
•
To exit the PHOTO function, switch to Thumbnail mode, then press the Up
navigation key.
View photos from your memory card or USB flash
disk
1. Insert your memory card
with photos into the
corresponding slot,
OR: insert your USB
flash disk into the USB
port.
2. Photos on your memory
card will appear after a
few seconds.
Copy photos from your photo source
1. In Thumnail mode, press the navigation keys to select one photo.
Hold the Down navigation key
2.
enter the setting menu, or press View on the remote control.
3. Select Copy to or Copy all to, then press OK.
4. Select the source where you want to store the selected photos.
Press OK to copy.
5.
Compact Flash card
Memory Stick/ XD/
Secure Digital/ MMC card
USB flash disk
for 2 seconds then release to quickly
Quick start guide
(Right side)