Page 1
Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http:// www.viewsonic.com in English, or in specific languages using the Regional selection box in the upper right corner of our website.
Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Substance Lead (Pb) Mercury (Hg) Cadmium (Cd) Hexavalent Chromium (Cr 6+ ) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers (PBDE) Certain components of products as stated above are exempted under the Annex of the RoHS Directives as noted below: Examples of exempted components are: 1. M ercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not specifically mentioned in the Annex of RoHS Directive. 2. L ead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic ceramic parts (e.g. piezoelectronic devices). 3. L ead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead). 4. L ead as an allotting element in steel containing up to 0.35% lead by weight, aluminium containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight. Proposed Maximum Actual Concentration Concentration...
Purchase Date: Product disposal at end of product life ViewSonic respects the environment and is committed to working and living green. Thank you for being part of Smarter, Greener Computing. Please visit ViewSonic website to learn more. USA and Canada: http://www.viewsonic.com/company/green/recycle-program/ Europe: http://www.viewsoniceurope.com/uk/kbase/article.php?id=639...
Important Safety Instructions Always follow the basic safety precautions below when using your Digital Photo Frame. This will reduce the risk of fire, electric shock, and injury. Warning: To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture, do not remove the cover, there are no spare parts inside, refer all product services to professional personnel. • Digital Photo frame is for indoor use only. • U nplug Digital Photo frame before performing care and maintenance. • D o not block the ventilation holes on the back of Digital Photo Frame at any time. • Keep your Multimedia Digital Photo Frame out of direct sunlight and heat source. • R oute power cord appropriately to avoid trip over by someone else or pinched by items placed on or against them. • O nly use the AC adapter included with the Digital Photo Frame. Using any other power adapter will void your warranty.
Identify the Parts Short press: Power On. Pause or Play. Move the selection Up. Press and hold 1 seconds: Enter. Press and hold 3 seconds: Power Off. Move the selection Left, display the Previous photo. Move the selection Right, display the Next photo. Short press: Move the selection Down, Exit slideshow. Press and hold 2 seconds: Show or close the OSD Menu Mode. OSD Menu Mode will close automatically after 10 seconds of menu inactivity. 5. USB port for USB Flash Drives 6. Card slot for SD, SDHC, MMC, MS 7. DC power input 8. Stand Setup Up the Digital Photo Frame The Digital Photo Frame is easy to set up. Just follow these steps: 1.
4. Press the on the back of the Digital Photo frame to power ON. The Digital Photo frame will automatically start a slide show of the photos on the memory card. 5. To display photos individually, press the Digital Photo Frame for full screen and start a slide show. 6. Press to pause or restart the Slide Show. Setting Viewing Options You can control all of the viewing options in the Setup menu using the buttons on the back of the photo frame. 1. To show the Setup Menu, press and hold the 2. With the Setup Menu open, use the a Display Setup. 3. Press to enter the sub-menu and listing the available settings. A shows the current setting.
Technical Specification Product 17.8cm/7.0” LCD Screen Digital Photo Frame Resolution 480 x 234 pixels Memory Card Format SD, SDHC, MMC, MS (max:32GB) File Format JPEG, BMP (Up to 18 million pixel) Slideshow mode Feature Multiple transitional Style for Slideshow Variable Speed for Slide Show USB Port USB 2.0 (Host) Power Adapter Input 100V-240V AC, 50~60Hz Power Adapter output 5V DC, 1A...
Renta y Datos, 29 SUR 721, COL. LA PAZ, 72160 PUEBLA, PUE. Tel: 01.222.891.55.77 CON 10 LINEAS Electroser, Av Reforma No. 403Gx39 y 41, 97000 Merida, Yucatan. Tel: 01.999.925.19.16 Other places please refer to http://www.viewsonic.com/la/soporte/index.htm#Mexico Latin America (Peru) www.viewsonic.com/la/ Macau www.hk.viewsonic.com...
VIEWSONIC Digital Photo Frame What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components. How long the warranty is effective: ViewSonic Digital Photo Frame are warranted for 1 year for labor from the date of the first customer purchase.
Mexico Limited Warranty VIEWSONIC Digital Photo Frame What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
Page 12
Contact Information for Sales & Authorized Service (Centro Autorizado de Servicio) within Mexico: Name, address, of manufacturer and importers: México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas, Col. San Fernando Huixquilucan, Estado de México Tel: (55) 3605-1099 http://www.viewsonic.com/la/soporte/index.htm NÚMERO GRATIS DE ASISTENCIA TÉCNICA PARA TODO MÉXICO: 001.866.823.2004 Hermosillo: Distribuciones y Servicios Computacionales SA de CV. Calle Juarez 284 local 2 Col. Bugambilias C.P: 83140 Tel: 01-66-22-14-9005 E-Mail: disc2@hmo.megared.net.mx Puebla, Pue. (Matriz): RENTA Y DATOS, S.A. DE C.V. Domicilio:...
Need help?
Do you have a question about the VFA770w-50E and is the answer not in the manual?
Questions and answers