Viewing Photos
Main menu
When a memory device is inserted into the Digital Photo Frame, the corresponding icon appears on the main menu.
On the main menu, you can select connected source to view photos or change frame settings.
Press the [M] button to access the main menu. All connected source, clock and setup icons are displayed.
Note: If you insert a memory device to the frame after switching on the frame, the Digital photo frame will start a slideshow automatically.
Viewing thumbnails
ViewSonic
SD/MMC/MS
Appears when you insert a SD, MMC or MS card.
USB
Appears when you inserted a USB flash driver.
Setup
Customize the settings of Digital Photo Frame.
In Photo mode, the photos on the selected memory source can be displayed on the screen as
thumbnails. Up to 15 photos are displayed at a time.
1.
Select a memory source (e.g. USB, SD/MMC/MS) on the main menu and press the [ ] button.
The photos are displayed on the screen as thumbnails.
2.
To navigate through the thumbnails or move to the next or previous page of thumbnails, press
the [ ], [ ], [ ] or [ ] button.
6
VFD810