ViewSonic DPX1002 Quick Start Manual page 15

Copy multi-audio
1. Select one audio, then press the Right navigation key. The selected audio
is labeled with a "+" mark.
2. Repeat step 1 for the other audio you want to copy to a source.
Finishing selection, repeat step 2–5 in section Copy audio from your
3.
audio source.
Delete audio from your audio source
1. Press the navigation keys to select one audio.
Press View on the remote control or hold the Right navigation key
2.
for two seconds to enter the audio settings menu.
3. Select Delete or Delete all, then press OK.
Delete multi-audio
Select one audio, then press the Right navigation key. The selected audio
1.
is labeled with a "+" mark.
2. Repeat step 1 for any other audio you want to delete.
3. Finishing selection, repeat step 2–3 in section Delete audio from your
audio source.
Volume adjustment
1. Press the navigation keys to select one audio.
2. Press View on the remote control or hold the Right navigation key
for two seconds to enter the audio settings menu.
Select Volume, then press OK.
3.
4. Select the desired volume from 0 to 16.
5. Press OK to set the volume.
The volume can also be set through the Setting and Video menus.
Supported format
The following audio formats are supported:
• MP3
Quick start guide 1