Getting Prepared; Inserting Memory Cards - ViewSonic DF87G Quick Start Manual

Getting Prepared

Inserting Memory Cards

• The digital photo frame accommodates CF/SD/MMC/MS/MS Pro/MS Duo cards.
• Before inserting the card, be sure it is formatted in FAT file system. Otherwise, the photo frame may not
recognize the media files.
• Processing speed and file size are positively correlated in that large images take longer to load. To
optimize its performance, it is suggested to use images less than 8 megapixel.
Positioning the Photo Frame
A.
For desktop display, spread the stand
as far as it can be spread on a flat and
stable surface.
Landscape display
Portrait display
Powering It On
Connect the device to a power source
with the supplied power adapter.
• Power Adapter Output: 5.0Vdc, 2.0A, 10W.
• Operating Temperature: 0°C~40°C.
With the label side facing the back of
the photo frame, insert the memory
card containing pictures, video clips,
and music files to be displayed in the
direction as illustrated.
• To remove cards, gently pull it out in the opposite
direction.
B.
For wall-mounting display, gently
place the photo frame over the screws
so that the screws will slide into the wall-
mounting slots.
120 mm / 4.7"
ON
OFF
Mounting it to the wall
DC IN
Switch the Power upward to the ON
position to turn on the digital photo frame.
��
���
DC IN
AV OUT
��
���
DC IN AV OUT
AV OUT
3