Technical Specification; Th306H Specifications - Beta Three TH Series User Manual

TH306H/64 TH115L
TH306H/94

TH306H Specifications:

Product:
Transducers:
Frequency Response (-3dB):
Sensitivity(1W@1m):
Maximum SPL(1m):
Power (GB):
Dispersion(H×V):
Impedance:
Crossover point:
Construction
Installation:
Connector:
× ×
Dimensions (W D H):
Packing Dimensions (W×D×H):
Net weight:
Gross weight:
6
TH Series Theatre Speaker
6" Two Way MF/HF Speaker
1X1.75" HF
1X6" MF
1
280Hz-20kHz
2
Passive mode:106dB(TH306H/64)
106dB(TH306H/94)
Bi-amp mode:MF:106dBHF :112dB
3
Passive mode: 126dB/132dB(Peak)
Bi-amp mode: MF:126dB/132dB(Peak)
HF:126dB/132dB(Peak)
4
Passive mode: 100W RMS
Bi-amp mode: MF:100W RMS
HF : 60W RMS
0
TH306H/64: 60 × 40
0
TH306H/94: 90 × 40
Passive mode 8 Ohms
Bi-amp mode: MF: 8 Ohm H F: 8 Ohm
2kHz-2.5kHz
15mm Plywood
:
24×M10 Steel Mounting Point
Paint : Durable Polyurethane textured paint
Black powder coated grille
NL8×1、8 Screw terminal
520×520×520mm(20.5×20.5×20.5in)
630×630×640mm(24.8×24.8×25.2in)
25.0kg(55.5 lbs)
37.0kg(81.8 lbs)
Speaker Testing Method
1. Frequency Response
Use Pink noise to test the speaker in the anechoic chamber,
adjust the level to make the speaker work at its rated impedance
and set the output
1m away from the speaker.
2. Sensitivity
Use full range Pink noise which has been modified using
an EQ
Increasing the
impedance and set the
sensitivity 1m away from the speaker.
4
4
3. MAX.SPL
4
Use full range Pink noise which has been modified using
0
an EQ
0
increase the
mum power output level, then test the SPL 1m away from
the speaker.
4. Rated Power
Use Pink noise to the IEC#268-5 standard to test the speaker,
increase the signal for a continuous period of 100 hours,
the rated power is the power when the speaker will show
no visible or measurable damage.

TECHNICAL SPECIFICATION

power at 1W, then test the frequency response
curve to test the speaker in the anechoic chamber,
signal to make the speaker
power output at 1W, then test
curve to test the speaker in the anechoic chamber ,
signal to make the speaker
work at its rated
the
work at its maxi-