4 x 6 line array full range column speaker (10 pages)
Summary of Contents for Beta Three TW Series
Page 1
Two Way 8" Full Range Passive Speaker TW Series Pro Loudspeaker System User Manual U M - T W 8 - 2 0 1 5 0 5 0 9 v e r A...
Page 2
SAFETY INSTRUCTIONS PLEASE READ THIS MANUAL FIRST Thank you for a buyin product. Read this manual first as it will help you operate the system properly. Please keep this manual for future reference. WARNING: This product must be installed by professionals. When using hanging brackets or rigging other than those supplied with the product, please ensure they comply with the local safety codes.
CONTENT TW Series Pro Loudspeaker System CONTENT PRODUCT INTRODUCTION Main Features Product Description Applications CONNECTION Connection Mode System Reference Diagram INSTALLATION Optional Installation Accessories Installation Options TECHNICAL SPECIFICATIONS Specifications Frequency Response and Impedance Curve Dimensions Product information may be updated without notification, please visit www.elderaudio.com for...
INTRODUCTION TW Series Pro Loudspeaker System Two Way 8" Full Range Passive Speaker Features One 8 High Power LF T " ransducer One 25mm HF Driver. Computer aided design to optimize frequency and phase response. Frequency Response 90Hz - 18kHz (-3dB).
CONNECTION TW Series Pro Loudspeaker System The 4 way push terminal connectors are available for amplifier connections. Paralelled connector is very convenient for another speaker connection. Push Terminals 1+ 1- INPUT Crossover HIGH System Reference Diagram BRIDGE IN CAUTION RISK OF ELECTRIC SHOCK...
INSTALLATION TW Series Pro Loudspeaker System Installation Accessories(Optional) Installation Reference The standard flying mounting hardware is very convenient 1.Hanging A for different installations and applications. 1. U-Bracket(Vertical) 2. U-Bracket(Horizontal) 2.Hanging B 3.Lifting the base (when use, will take from the cabinet, in turn, can be installed in the cabinet to see lifting point.)
TECHNICAL SPECIFICATION TW Series Pro Loudspeaker System Specifications Speaker Testing Method 1. Frequency Response Passive Wooden Speaker Product: 1x 8'' LF , 1x25mmHF Use Pink noise to test the speaker in the anechoic chamber, adjust the Transducer: level to make the speaker work at its rated impedance and set the output...