Table of Contents Table of Contents ................... 2 HighPoint NA762TB ................3 Kit Contents ................... 4 NA762TB Hardware ................5 Setup Procedures ................... 6 Using NA762TB ..................7 Customer Support ................11 FCC Part 15 Class B Radio Frequency Interference statement ..12...
6Gb/s storage devices - perfect for professional, I/O intensive applications such as digital content creation and media post production. The NA762TB's robust, stylish aluminum construction ensures your storage stays cool while running at optimum efficiency.
Kit Contents Enclosure x 1 Disk module x 8 (Installed) Hard Disk Drive mounting screw x 32 Key for HDD tray x 2 Thunderbolt™ cable x 1 (2 meters) Power Cord x 1...
NA762TB Hardware Panel Layout HDD Power LED: White - Power On Indicator HDD Status LED: Flash Blue - HDD Access Indicator, Red - HDD Failure Indicator Power on LED: White - Enclosure power on Fan Status LED: Normal - Green, Failure - Red (too slow RPM or stop) Temperature LED: Normal - Green;...
Carefully insert the HDD into each disk module and secure them with the provided mounting screws. Once complete, insert each disk module back into the front panel of the NA762TB. Connect the NA762TB to the host system with the Thunderbolt...
Using the NA762TB Verify the NA762TB is recognized by the HOST system. Click the Apple icon on top left of the screen, and select About This Mac, and then select More Info. Next, select System Report, and select Thunderbolt on left side of the pane of System Information.
Page 8
Verify the NA762TB RAID Controller driver. Following step 1, check to make sure the “Driver Installed” status for the NA762TB is “Yes”. If you are using OS X 10.9.x (Mavericks), the driver is natively supported by the OS. If you are using OS X 10.8.x (Mountain Lion) or earlier, you will need to download and install the Thunderbolt Aware driver for the NA762TB’s RAID controller.
Page 9
After verifying the RAID driver, download the NA762TB’s Web RAID Management interface (WebGUI). The WebGUI is available from the NA762TB product page on http://www.hptmac.com After downloading and installing the WebGUI, open the WebGUI by double-clicking the icon found on the desktop: Login to the WebGUI to configure RAID arrays.
Page 10
Eject to safely eject the RAID volume from the computer. The NA762TB supports Thunderbolt power management. While the NA762TB is connected to the host system using the Thunderbolt cable, shutting down the host will automatically power down the NA762TB.
Customer Support If you encounter any problems while utilizing the HighPoint NA762TB, or have any questions about this or any other HighPoint Technologies, Inc. product, feel free to contact our Customer Support Department. Web Support: http://www.highpoint-tech.com/websupport/ HighPoint Technologies, Inc. websites: http://www.highpoint-tech.com...
Need help?
Do you have a question about the NA762TB and is the answer not in the manual?
Questions and answers