Kogan KA92WCFREZA User Manual page 5

Levelling Feet
There are two levelling feet at the front of the unit.
If the unit is not level, the door and the magnetic seal alignments will not be covered
properly.
Reversing the Door Swing
Tools required: Phillips head screwdriver, Flathead screwdriver and Hexagonal spanner.
If you wish to have the door swing reversed, it is recommended that you contact a qualified
technician. If you believe you are qualified to do so, you may reverse the door yourself.
• Ensure the unit is unplugged and empty.
•
Adjust the levelling feet to their highest position.
•
To take the door off, it is necessary to tilt the unit backwards. You should rest the
unit on something solid so that it will not slip during the reversal process.
•
All parts removed must be saved to do the reinstallation of the door.
•
Do not lay the unit down flat, as this may damage the coolant system.
•
It is recommended that 2 people handle the unit during assembly.
1. Remove the plastic covering from the top door hinge.