Folding The Handle; Removing The Mower From Storage - Lawn-Boy Insight 10686 Operator's Manual

Folding the Handle

You can store the mower with the handle in the
upright or forward position.
Upright Position
1. Step on the foot
pedal and hold it down.
2. Move the handle to the upright position.
Forward Position
1. With the handle in the upright position, step on
the foot pedal and hold it down.
2. Move the handle to the all the way forward and
loosen the upper handle knob.
3. To unfold the handle, refer to Unfolding the
Handle on page 6.
m-7963
m-7964
m-7965
3352-945 Rev B
19
Removing the Mower from
Storage
1. Remove the spark plug and pull the recoil start
handle a few times to blow the excess oil from the
cylinder.
2. Install the spark plug and tighten it with a torque
wrench to 15 ft-lb (20 N
m).
3. Charge the battery.
4. Connect the wire to the spark plug.