Recommended Maintenance Schedule; Preparing For Maintenance - Lawn-Boy Insight 10686 Operator's Manual

Table of Contents

Advertisement

Maintenance
Note: Determine the left and right sides of the mower by standing in the operating position.

Recommended Maintenance Schedule

Important: Refer to your engine operator's manual for additional maintenance procedures.
Maintenance Service
Interval
Each Use
1
1 Month (5 Hours)
1
1 Year (25 Hours)
1
4 Years (100 Hours)
Annual Storage
1
Whichever comes first
2
Change the engine oil after the first 2 operating hours.

Preparing for Maintenance

1. Stop the engine and wait for all moving parts to
stop.
2. Disconnect the
spark plug wire from the
spark plug before
performing any
maintenance procedure.
Warning
If you leave the key in the ignition switch,
someone could accidently start the engine and
seriously injure you or bystanders.
Remove the key from the ignition switch before
you service, transport, or store your mower.
Maintenance Procedure
• Check the engine oil level. Refer to Checking the Engine Oil Level on page 8.
• Remove grass clippings and dirt from under the housing. Refer to Cleaning the
Mower on page 18.
• Charge the Battery. Refer to Charging the Battery on page 15.
• Replace the air filter; replace it more frequently in dusty operating conditions.
Refer to Servicing the Air Cleaner on page 15.
2
• Change the engine oil.
• Replace the blade or have the blade sharpened; replace it or have it sharpened
more frequently if the edge dulls quickly. Refer to Replacing the Blade on
page 15.
• Lubricate the wheel gears. Refer to Lubricating the Wheel Gears on page 15.
• Lubricate the upper handle. Refer to Lubricating the Upper Handle on page 16.
• Replace the spark plug (refer to your engine operator's manual).
• Clean the cooling system (refer to your engine operator's manual).
• Empty the fuel tank before repairs as directed or before annual storage. Refer to
Preparing the Mower for Storage on page 18.
• Charge the Battery. Refer to Charging the Battery on page 15.
m-7936
3352-945 Rev B
14
Refer to Changing the Engine Oil on page 15.
3. After performing the maintenance procedure(s),
connect the spark plug wire to the spark plug.
Note: Before tipping the mower to change the oil or
replace the blade, allow the fuel tank to run dry
through normal usage. If you must tip the mower prior
to running out of fuel, use a hand fuel pump to
remove the fuel. Always tip the mower onto its side
(with the air filter up).
Warning
Tipping the mower may cause the fuel to leak.
Gasoline is flammable, explosive and can cause
personal injury.
Run the engine dry or remove the gasoline with a
hand pump; never siphon.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents