Nav TV W204-N RVC Manual

Download this manual

BHM

11/24/15

NTV-DOC247

3950 NW 120

Ave, Coral Springs, FL 33065 TEL 561-955-9770 FAX 561-955-9760

www.nav-tv.com

info@nav-tv.com

W204-N RVC

NTV-KIT704

Overview

The W204-N RVC Kit allows the user to add a backup camera input (with active parking lines)

and 1 video input (front cam, etc) to the factory media screen in select 2012+ Mercedes

vehicles.

Kit Contents

Optional

LVDS

REV Trigger

Video

Input

Cable

W205-RVC Interface

OSD Menu remote

IR Eye

Plug & Play Power/CAN Harness

Agreement

End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for

misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is

intended for off-road use and passenger entertainment only.

1 |

P a g e

Page 1 W204-N RVC NTV-KIT704 Overview The W204-N RVC Kit allows the user to add a backup camera input (with active parking lines) and 1 video input (front cam, etc) to the factory media screen in select 2012+ Mercedes vehicles. Kit Contents...
Page 2 11/24/15 NTV-DOC247 Interface Connectors Not Used Analog Reverse Trigger Input Power/CAN IR Eye OUOUT Video IN Video OUT Dip Switches Not Used (from radio) (to screen) Dip Switch Settings DIP SW VEH TYPE VEH TYPE HIGH RES KEEP DOWN DOWN VEH TYPE VEH TYPE LOW RES...
Page 3 11/24/15 NTV-DOC247 Installation 1. Remove the radio. This may require the Mercedes hook tool for removing vents on some vehicles, others may just be clips and screws securing down dash panels. Remove all harnesses and set the radio aside. 2. Remove the factory screen. Disconnect all associated harnesses and set the screen aside.
Page 4 11/24/15 NTV-DOC247 Menu Adjustments Before you start:  The IR-Eye must be connected.  Make sure the car’s ignition is on and radio is on Return (menu  You must be in Reverse Camera mode control)  Reverse Camera Mode adjusts Reverse Camera Settings ...
Page 5 NTV-DOC247 W204-N RVC Operation  Once the W204-N RVC is connected properly, reverse activation is automatic. Placing the vehicle in reverse will display the connected camera’s image automatically. Note: If display doesn’t switch to reverse image when shifting into reverse or screen is distorted, check dip switch settings on page 2.

Ntv-kit704