J. Colomines 060309 ECLER author: date: project: product: approved: title: VERIFICATION PROCESS 51.0172 01.00 num: version: MAKING PROTECT LAMP HOLDER Protect lamp holder application: series one lamp from the amplifier power cable connector to AC outlet. If the amplifier has no fault, at the instant of switch on, the lamp is very bright because of high current pass through, when inner capacitor change up, amplifier is empty loading, the current is very small, the lamp isn’t on or slightly bright.
QUALITY CONTROL All mechanical parts should be visually revised, in order to detect scratches on the unit's painting; all screws should be on their place, correctly tight and unmarked. Check out the unit's general presentation. VERIFICATION USING MUSIC Verify the unit's sound quality, which should be distortion and noise free. Also check that all potentiometers can run smoothly their whole sweep, without annoying noises and crisperings.