Avaya Aura System Platform Installing And Configuring page 46

Installing System Platform using laptop
Configuring the laptop
To configure the laptop for direct connect to the services port, perform the following
tasks:
a. Assign 192.11.13.5 as IP address for the laptop.
b. Assign 255.255.255.252 as Subnet mask.
c. Assign 192.11.13.6 as Default gateway.
Connecting a laptop to the server
Prerequisites
Make sure that you have a Secure Shell (SSH) application such as PuTTY installed on your
laptop.
1. Connect the laptop to the services port (eth1). See
2. Start a PuTTy session.
3. In the Host Name (or IP Address) field, type 192.11.13.6
4. For Connection type, select Telnet.
5. In the Port field, type 22
6. Click Open.
7. Click Yes to accept the server's host key and display the PuTTY window.
8. Log on as craft or admin.
9. Type Exit and press Enter to close PuTTY.
46 Installing and Configuring Avaya Aura
for S8510 Server or Back of server
If you do not have a crossover cable, you can use an IP hub.
The system assigns the IP address 192.11.13.6 to eth1 by default. eth1 is the
second interface on the server.
Note:
The system displays the PuTTY Security Alert window the first time you connect
to server.
™
System Platform
Back view of server
for S8800 Server.
on page 30
April 2010