Table of Contents
Advertisement
Power Indicator
Status
Power ON
Green
Power Standby
Red
Power OFF
LED Off
Diagnosis
Red Blinking
(Detecting failure)
* See troubleshooting
Using Power Management
Please turn off the LCD monitor when it will not be used for long time. This could potentially increase the life and decrease the power
consumption of the LCD monitor.
Standby mode: Push the power button on the remote control or on the monitor to enter the standby mode.
Power Off: Push the Main Power Switch to enter the power off mode.
Display Signal of Video Source Setting to [VIDEO]
Use the input button on the front panel or the VIDEO SOURCE button on the remote control to set video source to [VIDEO].
Use the COLOR SYSTEM OSD menu to select [AUTO], [NTSC], [PAL], [SECAM], [PAL60], [4.43NTSC], according to your video format.
Picture Size
HDMI, DVI-D, VGA
COMPONENT, VIDEO
Signal Type
4:3
Squeeze
NORMAL: Display with the input signal aspect ratio from PC signal, or display in 4:3 aspect ratio at COMPONENT or VIDEO signal.
FULL: Display in the entire screen.
DYNAMIC: Expand 4:3 pictures to the entire screen with non-linearity. (Some round image might be cut by expansion.)
CUSTOM (ZOOM): Images can be expanded beyond the active display area. The image which is outside of the active display area would
not be shown.
REAL: Image will be displayed for one by one pixel.
ViewSonic
FULL
FULL
NORMAL SIZE
NORMAL
DYNAMIC
FULL
ZOOM
NORMAL
CUSTOM
REAL
NORMAL
DYNAMIC
REAL
CUSTOM
Recommended Size
ZOOM
25
CD5233
Advertisement
Table of Contents
