Advertisement
FROM CAMERA
Make sure you twist and lock BNC connectors
Audio enabled cameras will have a white RCA
connector to transmit audio signal (Optional).
6
Connect the ends of the cable
attached to the camera to the
ends of a video/power cable
labeled TO CAMERA ONLY.
Power cable
connectors
8
Connect the female power
leads of the BNC cables to the
male power splitter ends.
10
Connect the DVR power adapter
to the Power Input on the rear of
the DVR.
TO CAMERA
Power splitter
connectors
7
Connect the BNC connector of
the video/power cable labeled
TO DVR ONLY to an open video
input on the DVR.
NOTE:
Make sure you twist and
lock BNC connectors.
Camera Power
Power
splitter
9
Connect the power splitter to the
camera power adapter and plug
the adapter into a surge protector or
Uninterruptible Power Supply (UPS).
NOTE:
Power adapters are labeled TO
CAMERA ONLY and TO DVR ONLY.
Surge
Protector not
included
11
Plug the DVR power adapter into a
surge protector or Uninterruptible
Power Supply (UPS).
systems will beep upon booting up.
Adapter
Surge Protector
(not included)
NOTE:
Some
8
Advertisement
