WarmlyYours BARCELONA Installation Manual

TOOLS REQUIRED

Installation INSTRUCTIONS
- Review instructions carefully before installation
- Installation should be completed by a qualified person
- Please dispose of packaging in a resposible manner
22- "
3/4
578 mm
a.
A
b.
c.
a. Adapter, Leg Assembly to
Warmer, 0005-58140-0000
25mmx22mm, 2 PCS
b. Leg Assembly,
0005-58140-0001
2 PCS
Bolt, Hex, Cap, M8x50mm
c.
0005-58320-0000
2 PCS
Hex Key, 6mm
d.
0005-58900-1
1 PCS
Leveler Assembly, Threaded
e.
Shaft, 29mm, m*x20mm
0005-58810-0000, 1 PCS
B
Installation Support • (800) 875-5285 • www.WarmlyYours.com
BARCELONA INSTALLATION MANUAL
After installation is complete, connect the 5 foot electric power cord
and turn on the Power Switch. The unit will begin to heat. If the unit
will not be used for an extended time, simply turn the unit off using
the power switch.
1. Do not hook the unit up to a circuit until completely reading
these instructions.
2. This product is intended only for domestic use. Do not put the
unit into water. Do not use in a sauna, shower cubicle or steam
room. This product is for indoor use only.
3. If the heating wire inside the unit fails or becomes damaged, turn
the unit OFF and contact WarmlyYours. Do NOT attempt to repair
or remove the power switch or heating wire.
4. If you encounter any difficulties while installing your Towel
Warmer, installation support is available by phone, 24/7 at
(800) 875-5285.
5. If a return is necessary, please use original packaging if possible.