Canon EOS R5 Advanced User's Manual page 336

4.
Set [No. of shots].
Select [No. of shots].
As you set the number, refer to the time required ([
time ([
Select the digit.
Press <
Set the desired number, then press <
Can be set in a range of [0002]–[3600].
Make sure the playback time ([
Select [OK] to register the setting.
The playback time ([
enough free space to record the specified number of shots. Although
the camera can continue recording, the recording will stop when the
card becomes full.
Playback time ([
results in a file size exceeding 4 GB for a card not formatted in exFAT
( ). If you keep recording in this condition and the movie file size
reaches 4 GB, the time-lapse movie recording will stop.
Note
For details on cards that can record time-lapse movies (card
performance requirements), see
If the number of shots is set to 3600, the time-lapse movie will be
approx. 2 min. in NTSC and approx. 2 min. 24 sec. in PAL.
]).
> to display [ ].
]) is displayed in red if the card does not have
]) is displayed in red if the [No. of shots] setting
336
>. (Returns to [
]) is not displayed in red.
Card performance requirements.
]) and playback
].)