Auto Retry If Transfer Fails - Canon EOS R5 Advanced User's Manual

Auto Retry If Transfer Fails

If transfer fails, the camera's access lamp blinks in red. In this case, the following screen is
displayed after you press the <
connection].
To resolve the error displayed, see the troubleshooting information (
Once you have resolved the issue, the images that could not be sent initially will be
transferred automatically. With this option activated, transfer is attempted again
automatically after failure, whether automatic transfer is used or captured images are
transferred manually via FTP. Note that if you cancel transfer or turn the camera off, auto
retry is not attempted.
See Transferring Multiple Images at Once
Note
To automatically log off and end the Wi-Fi connection after transfer, you can
configure power-saving on the [FTP transfer settings] screen (
If you prefer not to end the Wi-Fi connection, set [Power saving] on the [FTP
transfer settings] screen (
> button and select [
and transfer images as needed.
) to [Disable].
671
: Wi-Fi/Bluetooth
).
).