Troubleshooting - Sharp FP-F30U Operation Manual

TROUBLESHOOTING

Before calling for service, please review the list below, since the problem may not be the product
malfunction.
SYMPTOM
Dust and smoke are
not removed.
The discharged air has
an odor.
Smell from a new filter.
Operation started
automatically after my
power was restored.
ON
(default)
(with the product OFF)
more 3 sec.
NOTE
• If the Fan Speed indicator lights illuminate for 10 seconds, the setting is
completed.
REMEDY (not a malfunction)
• Clean or replace the filter if they appear to be heavily
soiled. (Page 8,10,11)
• Check to see if the filter are heavily soiled.
Replace the filter.
• Immediately after removing the plastic bag, a slight odor
may occur.
This odor is not harmful for filter performance or human
exposure.
• This model has Auto Resume function, where the
operation resumes at the previous operation mode and
settings if the power is restored.
Lighting
EN-12
OFF
(with the product OFF)
more 3 sec.
Flashing