Playback - Silk'n RM249-DL User Manual

You will hear a signal sound when the Bluetooth function is
EN
switched on. The blue light on the Bluetooth button will also
blink quickly, indicating that the product is ready for pairing.
2. Turn on the Bluetooth feature of your device and select
"RM249-DL" from the list of available devices to pair up.
Refer to the user manual of your device to turn on the
Bluetooth feature.
When Bluetooth pairing is done, you will hear a signal sound.
The blue light on the Bluetooth button will also blink slowly,
indicating that the product is already paired.
• The product remembers your paired devices. Once
• If you want to permanently remove a paired device
• The Bluetooth function will automatically switch off

8.2 Playback

1. Start playback on your paired device.
The audio output will be played from the speaker
2. Press the Bluetooth button
3. Press the Bluetooth button again to resume the playback.
Perform other playback controls on your paired device.
4. When playback is done, press and hold the Bluetooth button
to switch off the Bluetooth function.
You will hear a signal sound when the Bluetooth function is
switched off. The blue light on the Bluetooth button will also
turn off.
13
the Bluetooth function is turned on, the product
automatically connects with your last paired device if
it is within the product's Bluetooth range (10 m).
from the product's memory, remove the Bluetooth
pairing on your device while your device is being
connected to the product. When this is done, you will
hear a signal sound and the blue light on the Bluetooth
button will blink quickly.
if the battery power is low or if it has been left idle
without connection for over 10 minutes.
once to pause the playback.
8
.
4