Advertisement
Quick Links
Advertisement
Related Manuals for JMA Ecco Automatic
Summary of Contents for JMA Ecco Automatic
- Page 2 1. Presentation and general aspects 1.1 General aspects 1.2 Transport and packaging 1.3 Identifying label 2. Machine characteristics 9-10 2.1 Family of keys 2.2 Nomenclature of the key 2.3 Main elements of the machine 2.4 Technical data 2.5 Components and functional parts 2.5.1 Accessories 2.5.2 Electrical circuit 2.5.3 Emergency switch for stopping the milling cutter...
- Page 3 Presentation Machine and general aspects Characteristcis The ECCO-AUTOMATIC is an automatic copying machine General aspects that is both robust and precise. It is designed to dupli- cate flat keys of cylinder locks, car keys, and cruciform (cross-shaped) and special keys. The ECCO-AUTOMATIC copying machine has been desig- ned taking current EEC safety regulations into account.
-
Page 4: Machine Adjustment
Effectiveness and operation Components and functional parts Machine adjustment 2.5.1 Accessories See figure 3 The ECCO-AUTOMATIC copying machine has 3 types of adjustment (Lateral, Depth of cut, and Positioners). 18-size fixed spanners Spanners for lateral and depth adjustment of The copying machine is supplied with three adjustments the machine having been carried out, as these are determined during Wedges for the tip stop of the key... - Page 5 - When the feeler touches the bit of the key, turn off Key copying operation the machine by activating the general switch located at the back. BEWARE! When used correctly, the ECCO-AUTOMATIC - At this point, unplug the power cable as a safety mea- copying machine is absolutely safe.
-
Page 6: Maintenance
Maintenance and safety 3.2.2 Copying a key without a stop When carrying out any maintenance operation, the following conditions must be complied with: • Introduce the two wedges (2) into one of the ver- Never carry out any maintenance with the machine tical grooves (R) of each clamp, depending on the in operation. -
Page 7: Safety Recommendations
• Once the distance adjustment has been carried out, block again the stop stud (W) by using a blocking stud (Z). • Finally, move the slide manually towards the fur- thest position on the right, and block it by pressing downwards.