Advertisement
CARTS AND WAGONS
4
ATTACH HANDLE EXTENSION
Some carts may ship with the handle extension
and the handle connected. Review the following
procedures and complete those that apply to your
cart. Complete the following steps to attach the
handle extension to the undercarriage:
1. Slide the handle extension into the steering
yoke.
2. Align the holes and insert the 5/16" x 2-1/4"
round-head screw.
3. Add the nut and tighten.
NOTE: The handle extension should move
freely. Tighten or loosen the bolt to achieve
the desired result.
To use the cart without the handle, connect
the extension to the hitch of a lawn tractor.
Straight Screwdriver
Wrench
6
1
5/16" x 2-1/4" Round-
Head Screw (1)
Handle Extension (1)
2
3
Parts List and Tools Required
5/16" Nut (1)
Revision date: 08.15.12
Advertisement
