Advertisement
3
ATTACH WHEELS
For cart #110486, begin with Step 1. For cart
#110488, skip Step 1 and begin with Step 2.
1. Take one spacer and slide it onto the axle.
2. Take one wheel, position the valve stem to the
outside, and slide the wheel onto the axle.
3. Slide one flat washer over the axle.
4. Add the locknut. (For cart #110488, insert the
cotter pin and bend to secure the wheel on the
axle. Continue with Step 6. Cotter pin and
wheel are not shown.)
5. Using a socket and ratchet, tighten locknut
until snug.
6. Repeat the steps as needed to attach all
remaining wheels. Verify that all valve stems
are to the outside.
7. Check tire pressure in all tires. Adjust as
needed.
Pliers
Socket and
Ratchet
Revision date: 08.15.12
1
3
5
Large Locknuts (4)
Cart #110486 only.
Axle Washers (4)
Spacers (4)
Cart #110486 only.
Cotter Pins (4)
Cart #110488 only.
CARTS AND WAGONS
Spacer
2
4
6
Photos above show the 110486
cart with locknuts. The 110488 cart
with cotter pins is not shown.
Parts List and Tools Required
Wheels (4)
5
Advertisement
