Advertisement
CARTS AND WAGONS
2
ATTACH UNDERCARRIAGE TO
THE CART BED
Complete the following steps to attach the
undercarriage to the cart bed.
NOTE: Position the cart bed so you can access all
sides.
1. With assistance, lift and place the
undercarriage onto the cart bed. Insert one
5/16" x 2-1/4" bolt through the cart bed
support and undercarriage.
NOTE: If mounting holes are slightly
misaligned, use a drill and a 3/8" bit to enlarge
the holes.
2. Slide one flat washer over the bolt.
3. Add one locknut. Do not tighten at this time.
4. Repeat Steps 1-3 for the remaining three (3)
bolts and tighten all bolts. Bolts should be
snug. To prevent damage to the bolts, do not
overtighten.
Wrench
Socket and Ratchet
4
5/16" Locknuts (4)
5/16" Flat Washers (4)
1
3
4
Tighten all bolts.
Parts List and Tools Required
5/16" x 2-1/4"
Bolts (4)
Cart Bed (1)
Add Flat
Washer
2
Add
Locknut
Revision date: 08.15.12
Advertisement
