Advertisement
1
ASSEMBLE UNDERCARRIAGE
The following steps show how to assemble the
undercarriage.
1. Slide the connecting shank into the front axle
assembly, align the mounting bolt holes, and
insert a 3/8" x 2-1/2" bolt.
2. Add a 3/8" flat washer and 3/8" locknut.
3. Slide the rear axle assembly onto the
connecting shank, align holes, and insert a
3/8" x 2-1/2" bolt. Secure using a 3/8" flat
washer and 3/8" locknut.
4. Verify that the undercarriage is assembled
as shown. Axles should be fully visible and
positioned up.
5. Tighten the fasteners using a ratchet and
socket and wrench. Bolts should be snug.
6. Continue by attaching the undercarriage to the
cart bed.
Axles
Up
Wrench
Socket and Ratchet
Revision date: 08.15.12
Connecting Shank (1)
3/8" Nuts (2)
3/8" Flat Washers (2)
Connecting
Shank
Front Axle
Assembly
Add Bolt and
Washer
Tighten Bolts
Parts List and Tools Required
Rear Axle
Assembly (1)
3/8" x 2-1/2" Bolts (2)
CARTS AND WAGONS
Align Mounting
Holes
Add Locknut
Axles
Up
Front Axle
Assembly (1)
3
Advertisement
