Advertisement
Knife of TBC-520L/530L cuts material as like scissors.
If there is a gab between upper and lower knife, there will be a problem.
So if you have a cutting problem due to gab between upper and lower knife, this
documents can help you.
As you can see, the gab can be adjusted by 5 bolts, refer to below image.
Before adjusting gab, please release bolts (#B-15, clamping bolts) a little to make lower
knife movable.
E-mail :
taewoo@cutex.co.kr
HOW TO ADJUST KNIFE
- 4 -
If you turn it by CW (clock wise) the lower
knife will be close to upper knife.
And if you turn it by CCW (counter clock
wise) the lower knife will move against
upper knife.
http://www.cutex.co.kr
Advertisement
