Yaesu FT-60R Operating Manual page 77

Set Mode Item 34 [ PSWD W ]
Function: Stores the password.
Available entries are 0-9, A, B, C, D, E (substitute for " "), and F (substitute for "#")
Set Mode Item 35 [ RESUME ]
Function: Selects the Scan Resume mode.
Available Values: BUSY/HOLD/TIME
Default: BUSY
BUSY: The scanner will hold until the signal disappears, then will resume when the car-
rier drops.
HOLD: The scanner will stop when a signal is received, and will not restart.
TIME: The scanner will hold for the five seconds, then resume whether or not the other
station is still transmitting.
Set Mode Item 36 [ REV/HM ]
Function: Selects the function of the [ HM/RV ] key.
Available Values: REV / HOME
Default: REV
Pressing the [ HM/RV ] key reverses the transmit and receive frequencies during
REV :
repeater operation.
HOME : Pressing the [ HM/RV ] key instantly recalls a favorite "Home" channel.
Set Mode Item 37 [ RF SQL ]
Function: Adjusts the RF Squelch threshold level.
Available Values: S-1/S-2/S-3/S-4/S-5/S-6/S-8/S-FULL/OFF
Default: OFF
Set Mode Item 38 [ RPT.MOD ]
Function: Sets the Repeater Shift Direction.
Available Values: RPT.OFF/RPT. -/RPT. +
Default: Depends on the transceiver version, as well as the setting of Set Mode Item 4:
ARS.
Set Mode Item 39 [ PRI.RVT ]
Function: Enables/disables the Priority Revert feature.
Available Values: RVT.OFF/RVT. ON
Default: RVT.OFF
See page 42 for details.
Set Mode Item 40 [ RX MOD ]
Function: Selects the receiving mode.
Available Values: AUTO/FM/AM
Default: AUTO (Mode automatically changes according to operating frequency)
FT-60R O M
S M
ET ENU
M
ODE
75