Yaesu FT-60R Operating Manual page 71

S /K S
Enables/Disables the beeper.
Selects the LCD/Keypad Lamp mode.
Selects the Control Locking lockout combination.
Selects the MONI key (just below the PTT switch) function.
Selects the function of the [HM/RV] key.
M S
Setting of the Automatic Power-Off feature.
Enables/Disables the Busy Channel Lock-Out feature.
Enables/Disables the BUSY LED while the Squelch is open.
Shifting of the CPU clock frequency.
Indicates the DC Supply Voltage.
Enables/Disables the Emergency Automatic ID (EAI) Fea-
ture.
Enables/Disables the Band-edge beeper while selecting the
frequency via the DIAL knob.
Selects the alarm(s) utilized when the Emergency function
is engaged.
Enables/disables the Password feature.
Stores the password.
Adjusts the RF Squelch threshold level.
Selects the receiving mode.
Selects the Smart Search Sweep mode.
Setting of the synthesizer steps.
Setting of the TOT time
Enables/Disables the TX LED while the radio is transmit-
ting.
Enables or disables the VFO band edge limiting for the cur-
rent band.
Select Wide (±5 kHz) or Narrow (±2.5 kHz) TX Deviation.
FT-60R O M
S M
ET
S M I A
6 [ BEEP ]
KEY+SC / KEY / OFF
24 [ LAMP ]
KEY / 5SEC / TOGGLE
25 [ LOCK ]
LK KEY / LKDIAL / LK K+D / LK
PTT / LK P+K / LK P+D / LK ALL
26 [ M/T-CL ]
MONI / T-CALL
36 [ REV/HM ]
REV / HOME
S M I A
1 [ APO ]
OFF / 0.5H - 12.0 H
5 [ BCLO ]
BCL. ON / BCL.OFF
8 [ BSY.LED ]
LED. ON / LED.OFF
9 [ CLK.SFT ]
SFT.OFF / SFT. ON
12 [ DC VLT ] –
18 [ EAI ]
INT. 1M - INT. 50M /
ON. 1M - CON.50M / OFF
19 [EDG.BEP ]
BEP.OFF / BEP. ON
20 [ EMG S ]
EMG.BEP / EMG.LMP / EMG.B+L /
EMG.CWT / EMG.C+B /
EMG.C+L / EMG.ALL / OFF
33 [ PSWD ]
PWD.OFF / PWD. ON
34 [ PSWD W ] –
37 [ RF SQL ]
S-1 / S-2 / S-3 / S-4 / S-5 / S-6 /
S-8 / S-FULL / OFF
40 [ RX MOD ]
AUTO / FM / AM
42 [ S SRCH ]
SINGLE / CONT
49 [ STEP ]
5 / 10 /12.5 / 15 / 20 / 25 /
50 / 100 kHz, or AUTO
51 [ TOT ]
1MIN - 30MIN or OFF ( 6MIN )
52 [ TX.LED ]
LED. ON / LED.OFF
54 [ VFO.BND ]
BAND / ALL
55 [ WID.NAR ]
WIDE / NARROW
M
ENU ODE
( )
V
( )
V
69