Vertex Standard VX-2200 Series Operating Manual page 15

A O
DVANCED PERATION
C S
Press (or press and hold) the assigned programmable key to change the 5-Tone
encodeing digit. To change the tones, select the desired digit using the [ P1 ] / [ P2 ]
keys, then change the number using the [ ] / [ ] keys.
S D
Your Dealer may have pre-programmed Auto-Dial telephone number memories into
your radio.
To dial a number, press (or press and hold) the assigned programmable key, then
press the microphone's key corresponding to the Auto-Dial memory number list pro-
vided by your Dealer if the keypad microphone is using, or press the PTT key if the
normal (without keypad) microphone is using. The DTMF tones sent during the dial-
ing sequence will be heard in the speaker.
P A
Press (or press and hold) the assigned programmable key to use the transceiver as a
PA amplifier. When you enable this function, a tone sounds and "PUBLIC A" will
appear on the display. The public address can be used even while scanning and re-
ceiving a call.
EXT. ACC1
Press (or press and hold) the assigned programmable key to toggle output port on "1"
"on" and "off."
EXT. ACC2
Press (or press and hold) the assigned programmable key to toggle output port on "2"
"on" and "off."
D CH#1/CH#2
Press (or press and hold) the assigned programmable key to recall the Dealer pre-
programmed channel directly.
VX-2200 S O M 13