Table of Contents
Advertisement
READ THOROUGHLY THE OPERATOR SAFETY INSTRUCTIONS ON THE FOLLOWING
PAGES WHICH ARE THE AMERICAN NATIONAL STANDARD OF POWERED
SHREDDERS/GRINDERS SAFETY SPECIFICATIONS, PROVIDED BY ANSI AND THE O.P.E.I.
THE FOLLOWING COUTIONS ARE PROVIDED BY SALSCO AS A QUICK REFERENCE ONLY AND ARE
NOT MEANT TO REPLACE THE PRECAUTIONS ON THE FOLLOWING PAGES.
1. ALWAYS use protective eyewear when machine is in operation.
2. ALWAYS use gloves and wear ear protection when machine is in operation.
3. NEVER put hands, legs or any part of your body into or near the chipper intake or discharge openings.
4. NEVER run machine with guards removed or shaft cover removed.
5. ALWAYS allow machine to cool off, BE SURE machine has stopped completely, and disconnect drive
shaft from the tractor before attempting any maintenance, or repair.
6. NEVER stand in front of chipper infeed hopper. It is possible for a chip or piece of wood to be thrown out.
7. BE SURE the machine and tractor is parked on a dry level surface before starting operation.
8. DO NOT operate with loose clothing or long unrestrained hair. BE SURE vines and branches are not
wrapped around your body parts.
9. DO NOT operate on ice or any other slippery surface. BE SURE area around machine is clear and clean.
You don't want to trip or fall into the machine.
10. NEVER leave machine running unattended, especially around youngsters or persons not instructed in the
safe operation of this machine.
11. READ and understand federal guidelines provided with this manual on the following pages.
O:\Manuals\810PTO Chipper\810PTO Manual P.W. 10.30.2017.doc
CAUTIONS
- THINK -
REMEMBER – IT'S YOUR HAND OR FOOT!
-6-
Advertisement
Table of Contents
