STATEMENT OF FACT You have just purchased the highest quality, most dependable Chipper on the market today. This unit has the ability to meet exact standards and perform for years with minimum downtime. HOWEVER, it cannot read nor will it understand this manual no matter how long you leave it on top of the machine.
It has been and will continue to be the policy of SALSCO to update existing machines at its own discretion. Whenever possible, new designs will be made in such a way that they can be "Retro Fit"...
TWO PAGES, WHICH ARE THE AMERICAN NATIONAL STANDARD OF POWERED SHREDDERS/GRINDERS, SAFETY SPECIFICATIONS PROVIDED BY ANSI AND THE O.P.E.I. THE FOLLOWING CAUTIONS ARE PROVIDED BY SALSCO AS A QUICK REFERENCE ONLY AND ARE NOT MEANT TO REPLACE THE PRECAUTIONS ON THE PREVIOUS PAGES.
600 PTO SERVICE SCHEDULE Whenever service is to be done to a PTO implement, be sure to disconnect the drive shaft. 2. GREASE all bearings daily. DO NOT OVER GREASE. Wipe extra grease off bearings. 3. To sharpen blades: Remove hopper or open door (depending on which model machine).
HOW TO CUT A DRIVE SHAFT 1) Attach the implement to the tractor. Raise and lower it, BE SURE it's angle is correct and there is nothing hitting. 2) Raise and lower till the stub PTO shaft on the tractor and the implement are the closest to each other they can be.
DETERMINATION AS TO WHETHER THESE PARTS MUST BE RETURNED. g) Our Warranty Department will contact and instruct you on how to return the Parts to Salsco on an RA #. Returns MUST be made within 30-Days from issuance of RA #. FREIGHT CHARGES ON RETURN OF PARTS IS THE RESPONSIBILITY OF THE CUSTOMER.