Defiant With Flue Collar Heat Shield Only; Defiant With Flue Collar Heat Shield And Shielded Connector; Defiant With Flue Collar Heat Shield And Double-Wall Connector - Vermont Castings Defiant 1610 Installation And Operating Manual

Defiant 1610 Non-Catalytic Woodburning Stove
Distance from the Center of the Flue Collar to the Wall for 6" Connections ONLY
The information on this page is helpful in planning stove placement, particularly in those installations with chimneys
that pass through the ceiling. However, this is not a clearance chart. Final stove clearances must adhere to the
guidelines in the clearance chart on Page 14 for 6" connections.
Unprotected Surfaces
Parallel Installations
Side (A)
41³⁄₄"
(1060 mm) (772 mm)
Defiant With Flue Collar Heat Shield and Shielded Connector:
Side (A)
41³⁄₄"
(1060 mm) (441 mm)
Defiant With Flue Collar Heat Shield and Double-wall Connector:
Side (A)
41³⁄₄"
(1060 mm) (568 mm)
A
*
* This distance, from the center of the flue collar to the front edge of the hearth, is the same for all installations on this
page: 35" (889 mm) in the United States and 37" (340 mm) in Canada.
18
Defiant With Flue Collar Heat Shield Only
Corner
Installations
Rear (B) Corner (C)
30³⁄₈" 37"
(440 mm)
Rear (B) Corner (C)
17³⁄₈" 37"
(940 mm)
Rear (B) Corner (C)
22³⁄₈" 26"
(660 mm)
B
C
ST511
Intrepid
flue centerline
Diagrams
11/16/00
Parallel Installations
Side (D)
28³⁄₄"
(730 mm)
Side (D)
28³⁄₄"
(730 mm)
Side (D)
25³⁄₄"
(654 mm)
D
*
Protected Surfaces
Installations
Rear (E)
25³⁄₈"
(645 mm)
Rear (E)
25³⁄₈"
(660 mm)
Rear (E)
21³⁄₈"
(543 mm)
E
Corner
Corner (F)
30"
(762 mm)
Corner (F)
30"
(762 mm)
Corner (F)
27"
(686 mm)
F
30002850