Download Print this page

Infinity 20 x 20 All Trac Frame Tent Setup Instructions page 21

Advertisement

40 x 40 Contempo Frame Tent Set Up Instructions
22' 2" Keder
Pipe
8 way crown
Corner
Pre-Site Inspection- Call your local utitlity companies prior to installation for any underground obstructions.
1. Layout the frame parts in the estimated location peertaining to the diagram. The spreader pipe is placed out to form
the perimeter, and the rafters are laid in the interior location.
2. Start with the 8 way crown. Lay the crown on a flat surface to determine the correct placement, when the crown is on
a flat surface the angles that are not touching the ground (every other one) will correlate with the 4 corners.
Attach the hip rafters (14'4'' red) to the 8 way crown at angle not touching the ground by sliding the pole over the fitting
and lining up the holes in the pole with those in the fitting. Place a pin in the first hole to secure the pole in place. Repeat
at all four corners.
3. Attach the poles (21' 10" orange) to two of the remaining angles of the 8 way crown using the same technique as in step 2.
Attach the two 22' 2" Keder Pipe to the remaining opposite angles aligning up the 8 way crown with the keder slots.
4. Attach the Bear Claw fittings to the 4 hip rafter (14'4" red), at point 6, by sliding the pole over the fitting. Line
up the hole of the pole with those of the fitting and place a pin. Attach hip rafters (14'4'' red) to the Bear Claw at
points 1, 3, and 5. Attach corner rafters (10'6" green) to the Bear Claw fitting at points 2 and 4.
5. Attach the corner fitting to the hip rafter (point 3 only) by sliding the pole over the fitting. Line up the hole of the
pole with those of the fitting and place a pin. Attach the Fan T to the rafters (21'10" orange) and to the hip rafters
(points 1 & 5).
6. Join the regular t fittings to the corner poles (10'6" green) by sliding the pole over the fitting. Line up the hole of
the pole with those of the fittings and place a pin.
All Seasons Tent Sales
10'6"
QTY
10'6"
2
2
22' 2" Keder
16
Pipe
8
16
16
8 Way Crown Regular T
Bear Claw
Pipe
SIZE
COLOR
22' 2"
Orange
21'10"
Orange
14'4"
Red
Hip Rafter
10'6"
Green
Corner Rafter
14'4"
Red
Spreader
7' 8"
Black
Corner
Fan T
40 x40 All Trac Frame Tent Instructions page 1 of 2
Components
Style
QTY
Keder
1
8 Way Crown AT
Rafter
4
Regular Corners
8
Regular T's
4
Bear Claws
4
Legs
16
16
Baseplates
16
Weights / Stakes
104
Optional Items
1
Brace Package
Style
Fan T
Ratchets
Tent Pins

Advertisement

loading