Download Print this page

Infinity 20 x 20 All Trac Frame Tent Setup Instructions page 17

Advertisement

30 x 50 All Track Frame Tent Set Up Instructions
Half Crown
16' 5" Keder
16' 5" Keder
Pipe
Pipe
Spreader T
16' 5" Keder
Pipe
Half Crown
Corner
Pre-Site Inspection- Call your local utitlity companies prior to installation for any underground obstructions.
1. Layout the frame parts in the estimated location peertaining to the diagram. The spreader pipe is placed out to form
the perimeter, and the rafters are laid in the interior location.
2. Start with one of the Half Crowns. Attach the hip rafters (21' 10" orange) to the Half Crown at the second and fourth
points by sliding the pole over the fitting and lining up the holes in the pole with those in the fitting. Place a pin in the
first hole to secure the pole in place.
3. Attach the 2 Rafter poles (16' 1" brown) to points - three and the 16' 5" keder pipe to points one and five of the
Half Crown using the same technique as in step 2.
4. Attach a spreader (9'4" white) to the Half Crown, and connect it to the Spreader T. Connect another spreader (9'4"
white) to the second Half Crown from the Spreader T.
5. Attach the remaining Keder Pipe (16' 5" brown) to the Spreader T's.
6. Connect the corner fittings to the hip rafter by sliding the pole over the fitting. Line up the hole of the pole with the first
hole of the fitting and place a pin.
7. Join the regular t fittings to the poles by sliding the pole over the fitting. Line up the hole of the pole with the first
hole of the fittings and place a pin.
8. The perimeter is ready for assembly. Connect the Regular T to the corners using the spreaders (14'4" red). Slide
the poles over the fittings, line up the holes, and pin the pole and fitting together. Use the white 9' 4" spreaders in the
middle. When all of the spreaders have been secured in place, the frame will be complete.
9. Slide the keder on the tent through the keder pipe starting at the regular t going up through the Half Crown, then
come back down the other side. Then slide the middle tent top pieces through the middles. Repeat the step for the
other end tent top section.
All Seasons Tent Sales
QTY
4
6
2
8
6
12
Half Crown AT Regular T
Pipe
SIZE
COLOR
21'10"
Orange
Hip Rafter
16' 5"
Brown
16'1"
Brown
14'4"
Red
9'4"
White
7' 8"
Black
Corner
Spreader T AT
30 x 50 All Trac Frame Tent Instructions page 1 of 2
Components
Style
QTY
2
Half Crown AT
Keder
4
Regular Corners
Rafter
8
Spreader
1
Spreader T -AT
Spreader
12
Weights / Stakes
Legs
12
64
12
12
Optional Items
1
Brace Package
2
Spreader Cables
Style
Regular T's
Ropes
Tent Pins
Ratchets
Baseplates

Advertisement

loading