Related Manuals for Rockville Go Party X10
Summary of Contents for Rockville Go Party X10
- Page 1 Go Party X10 DUAL 10˝ BATTERY POWERED BLUETOOTH PARTY SPEAKER + UHF MICROPHONE OWNER’S MANUAL...
-
Page 3: Important Safety Instructions
Thank you for purchasing this Rockville Go Party X10 10˝ Battery Powered Blue- tooth Party Speaker + UHF Microphone. Please read this owner’s manual carefully for proper use of your Rockville Go Party X10. Should you need technical assis- tance, please call our technical help line at 1-646-758-0144, Monday through Friday, 9am to 5pm EST. - Page 4 Functions 1. 3.5mm AUX input 2. ¼˝ unbalanced microphone inputs. Please note: We recommend using professional unbalanced dynamic mics as they are least likely to be affected by interference. Low cost, high impedance mics can be used, however the level of background noise is higher since an unbalanced circuit is far more susceptible to interference.
-
Page 5: Operation
The other unit will show the word “tOt.” This will be the slave unit and will act as the right channel. 6. Go to your phone's Bluetooth interface and select "Go Party X10" from the list of available devices. If pairing is successful, the word bLUE on the master unit will stop flashing. - Page 6 7. Use the master VOLUME knob to set the volume level. Microphone The Go Party X10 includes a wireless mic. It also features two ¼˝ unbalanced MIC IN ports (located on the top of the unit) to connect wired mics (not included). There is an indepen- dent mic volume control and an echo effect control.
- Page 7 USB/SD The built-in media player allows you to play MP3 files. To access this function follow the steps below. 1. Make sure the speaker is ON. 2. Insert a USB flash drive or SD card into the corresponding port. Music should begin playing automatically.
-
Page 8: Features And Specifications
Battery Replacement Read these instructions carefully for proper replacement of speaker’s battery. Please note, although it is possible for you to remove and replace the battery, we recommend you contact our customer support service department before doing so. 1. Turn the speaker off and unplug the external power supply. 2. -
Page 9: Troubleshooting
Troubleshooting PROBLEM SOLUTION 1. Make sure the unit is plugged in and the power switch is in the No power ON position. 2. Check that the power cable is plugged in tightly to the unit. 3. If using the battery, make sure the battery is charged and that the power switch is in the battery operation position (see page 5 for details.) No sound/... -
Page 10: Federal Communications Commission Compliance Information
Entrance A Inwood, NY 11096 Hereby declares that the product(s) Go Party X10 speaker complies with FCC rules as mentioned in the following paragraph: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. - Page 12 RockvilleAudio.com © 2020 ROCKVILLE // Features and specifications are subject to change and or improvement without notice.
Need help?
Do you have a question about the Go Party X10 and is the answer not in the manual?
Questions and answers