Advertisement
Quick Links
Advertisement
Related Manuals for Rockville ROCK PARTY 6
Summary of Contents for Rockville ROCK PARTY 6
- Page 1 ROCK PARTY 6 DUAL 6.5˝ BATTERY-POWERED BLUETOOTH SPEAKER OWNER’S MANUAL...
-
Page 3: Important Safety Instructions
Thank you for purchasing this Rockville ROCK PARTY 6 6.5˝ Battery-Powered Bluetooth Speaker. Please read this owner’s manual carefully for proper use of your ROCK PARTY 6. Should you need assistance, please call our technical help line at 1-646-758-0144, Monday through Friday, 9am to 5pm EST. - Page 4 Functions 1. ¼˝ Unbalanced microphone inputs. Please note: We recommend using professional unbalanced dynamic mics as they are least likely to be affected by interference. Low cost, high impedance mics can be used, however the level of background noise is higher since an unbalanced circuit is far more susceptible to interference.
-
Page 5: Operation
LED screens and they should connect automatically. 2. Go to your phone’s Bluetooth interface and select “Rock Party 6” from the list of available devices. The unit that your device connects to will be the primary unit (left speaker). - Page 6 Always stand behind the unit when using microphones so as to avoid feedback. Recording Microphone Input The Rock Party 6 can record all microphone input to a USB drive. Simply press the REC button on the remote control while using the microphone(s). To play back your recording, press the REC PLAY button on the remote control.
- Page 7 Battery Operation and Charging To use the internal battery, first ensure that the battery is fully charged (see the charging procedure below). To charge the battery: 1. Turn the speaker off. 2. Plug in the external power supply to the charging port located at the top of the unit. 3.
- Page 8 Features and Specifications • 200W Peak power • 100W Program power • 50W Continuous RMS power • Rechargeable speaker can last 3–8 hours per charge depending on volume • Built-in Bluetooth 5.0 audio streaming (up to 66 feet) • Built-in TWS (true wireless stereo) technology for linking of two speakers •...
-
Page 9: Troubleshooting
Troubleshooting PROBLEM SOLUTION 1. Make sure the unit is plugged in and the power switch is in the No power ON position. 2. Check that the power cable is plugged in tightly to the unit. 3. Make sure the battery is fully charged (see page 5 for details). No sound/ 1. -
Page 10: Federal Communications Commission Compliance Information
Address: 600 Bayview Ave. Entrance A Inwood, NY 11096 Hereby declares that the product Rock Party 6 complies with FCC rules as mentioned in the following paragraph: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. - Page 12 RockvilleAudio.com © 2020 ROCKVILLE // Features and specifications are subject to change and/or improvement without notice.
Need help?
Do you have a question about the ROCK PARTY 6 and is the answer not in the manual?
Questions and answers
How do I turn off the voice prompt "Bluetooth Disconnect" on my Rockville Rock Party 6 speaker
How do I just connect a voice prompt on my rock party 6 speaker that says "Bluetooth disconnect"