Advertisement
Advertisement
Table of Contents
Related Manuals for Rockville RPG-122K
Summary of Contents for Rockville RPG-122K
- Page 1 OWNER’S MANUAL...
- Page 2 This project has been a culmination of years of development involving a team of dreamers, engineers, designers and marketing gurus. Proudly conceived and developed in the USA, Rockville pro audio speakers are designed and engineered by a team of music enthusiasts, DJ’s and musicians.
-
Page 3: Important Safety Instructions
DO NOT OPEN • To reduce risk of electric shock, never open the unit. There are no user serviceable parts, refer service to an authorized Rockville service center. • Do not expose this unit to any kind of moisture. •... - Page 4 Setting Up Your Power Gig Professional Sound System Your Power Gig is set up to produce the full spectrum of sound from its woofer and tweeter horn combination. The lower frequencies seek out the floor of the room that they are playing in and travel along the floor and walls.
- Page 5 1. Choose a microphone with high directivity, i.e. cardioid or hyper-cardioid polar pattern. 2. Never point the microphone directly down in front of the speaker. Holding the micro- phone in normal position will allow you to be closer to the stage monitor with out feedback.
- Page 6 3. Keep Volume at 0 position. 4. Turn Mic Level to 0 position. 5. Switch on the Power Gig unit. 6. Slowly turn Mic Level clockwise until you achieve appropriate volume setting. This is determined by the CLIP LED indicator light. Proper function is achieved when the CLIP indicator lights up at peak levels, it should never be in constant on position.
-
Page 7: Volume Level
Line Input Feature You can use the Line Input function when you wish to hook up an additional stereo signal source without the use of a mixer console. CD players, DVD music players, MP3 players etc can be plugged directly in to the RCA jacks labeled LINE INPUT. To connect a CD, DVD music player or MP3 player. -
Page 8: Installation
Keyboard Amplification While guitarists and bassists have their own amplifiers to ensure that the volume pro- duced by their instrument matches that of the other sound sources on stage, keyboards and synthesizers are a different story. They usually have no built-in speakers which means they need an external sound source. -
Page 9: Bluetooth Pairing
Bluetooth Pairing To connect your iPod, iPhone, MP3 player, Android phone or any other Bluetooth capable device follow the steps listed below. 1. Make sure the Power Gig unit’s power switch is in the ON position. 2. Turn on the Bluetooth feature on your device and ensure that it is in “discoverable” mode. - Page 11 1. Display screen. 2. USB and SD Card input. 3. MP3 Player controls. Previous / Next track buttons also serve as volume controls. For track control quickly press button. For volume control press an hold button. Press Play button once to play track, press again to pause. When in FM radio mode press and hold to scan through.
-
Page 12: Fuse Replacement Diagram
Troublesßhooting UNIT FAILS TO POWER UP. 1. Make sure unit is plugged in properly to wall outlet. 2. Check that power cable is plugged in tightly to unit. 3. If people or equipment tend to step and roll over or stretch your power cable it can get damaged. -
Page 13: Federal Communications Commission Compliance Information
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION Responsible party name: Rockville Address: 333 Pearsall Ave. Cedarhurst, NY 11096 Hereby declares that the product(s) Power Gig RPG122K pro audio speakers comply with FCC rules as mentioned in the following paragraph: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. - Page 14 Rockvilleaudio.com © 2014 ROCKVILLE // Features and specifications are subject to change and or improvement without notice.