Software Version; Setting Sleep Time; Setting Alarm - Hitachi KHD101E Instruction Manual

Software Version

1. Press Menu and then press
Press Enter to confirm.
2. The software version will show on the display.
3. Press Menu to exit.

Setting Sleep Time

This feature allows you to programme the unit to switch to Standby mode
by itself after a set sleep time.
1. Press Menu button, and then press
press ENTER button to confirm.
button to browse options (Sleep off, 15, 30, 45, 60 or 90
2. Press /
minutes), then press Enter button to confirm.
3. To view the sleep time, redo step 1 again.
4. To cancel sleep feature while the sleep timer is still counting down,
redo steps 1-2 to select <Sleep off>.

Setting Alarm

Your radio includes dual alarms. To set Alarm, make sure you have set the
time first.
It is highly recommended to keep the power adapter connected. When the
batteries are completely exhausted, the alarm function will not work.
1. Press Menu button, and then press
press Enter button to confirm.
button to select <Alarm 1 Setup> or <Alarm 2 Setup>,
2. Press /
and then press Enter button to confirm.
3. Press / button to select options, and then Enter button to confirm
the setting.
Alarm time
Alarm duration
time
button to select <SW version>, then
/
00:00 (manually set up the time)
15/30/45/60/90 minutes
button to select <Sleep>,
/
/ button to select <Alarm>,
GB
17