Advertisement
MANUAL TUNE
It is possible to manually tune to a specific channel/frequency and
add this to the station list.
This function can be used to assist the positioning the antenna to obtain
the optimum reception for a specific channel/frequency.
Press the MENU button. 'Station order' will be displayed.
Press the NEXT button to display 'Manual tune'.
Press the SELECT button.
Use the PREV/NEXT buttons to select the channel/frequency.
Press the SELECT button. A rectangle will be displayed on first line of
the display. The position of this rectangle indicates the signal strength,
i.e. the further towards the right the greater the signal strength.
7A
Adjust the position of the antenna to obtain the optimum signal strength.
Press the SELECT button to return to normal service.
Dynamic Range Control (DRC)
DRC adds or removes a degree of compression to compensate for the
differences in the dynamic range between radio stations. For example, a
station broadcasting popular music may have a high level of
compression applied since the emphasis is on a constant high listening
level, whereas a station broadcasting classical music will have little or
no compression as the listener requires all of the highs and lows in the
music to define the detail.
There are three levels of compression:
•
DRC0
No compression applied.
•
DRC1
Maximum compression applied (this is the default).
•
DRC1/2 Medium compression applied.
188.92MHz
Press the MENU button. 'Station order' will be displayed.
Press one of the PREV/NEXT buttons until 'DRC value' is displayed.
Press the SELECT button. The current DRC level will be displayed on
line 1.
Press the PREV/NEXT buttons to select between the three values on
line 2 of the display.
When the required value is displayed press the SELECT button.
Language
There is only one option presented-English.
Software Version
This is provided as a reference when servicing is required.
Press the MENU button. 'Station order' will be displayed.
Press one of the PREV/NEXT buttons until 'Sw version' is displayed.
The version number will appear in line 1.
Advertisement
