Operation - Klarstein Bornholm Smart Instruction Manual

OPERATION

Starting
1. Take out the heater from the carton carefully. Please save the carton for off-season storage.
2. Make sure the power switch is in the OFF position before plugging it in.
3. Ensure the heater is fully assembled according to the Mounting Guide .
4. It is better not to use the same electric outlet with other high wattage electrical appliances in order to avoid
overloading your circuit.
Turn on
Plug in and turn on power switch, heater is in standby with buttons 1/2/3/4 on.
Press button (4), heater turns on, display shows current area temperature.
Setting the temperature
Press button (1), temp. indicator flashes and its setting is activated. By pressing buttons (2) & (3), we select desired
temp. and save it. Heater is heating, display shows current temperature and button 5 lights on.
Setting timer
Timer Start Heating Time
In off-heating mode, press (1) twice to set timer (0 H to 24 H), and button (2) & (3) to set temperature. After setting,
it shows area temperature. Indicator (8) lights on in timer period and off when timer ends, then heater starts heating
at high level.
Timer Stop Heating Time
In heating mode (high or low level), press (1) twice to set timer and button (2) & (3) to set temperature. After setting,
it shows area temperature. Indicator (8) lights on in timer period and off when timer ends. Then heater stops heating.
High/Low Heat Selection
a. In working mode, button (2) shifts between high heating and stop heating (indicator (7) lights on when high
heating and off when off heating).
b. In working mode, button (3) runs between low heating and off heating(indicator (6) lights on when low
heating and off when off heating).
c. In working mode, button 12 shifts among Off/Low/High heating, indicator 7 lights on in high heating,
indicator 6 lights on in low heat, and no light is on when off heating).
Child-lock function
In heating mode, press both (2) & (3) for 3 s, child lock function acts and system is locked, no setting could be done.
After 5 s, display shows area temperature. Unlock: Press both (2) & (3) for 3 s.
22