Removal Procedure - Lennox LNWR21X Service Manual

Service Manual

11.Removal Procedure

Steps
1.Remove panel assy
Open t he air-inlet panel; remove the
filter; remove the screws in the middle,
at the left side and right side of the
panel; beat the clasp of cabinet slightly
and then remove the panel.
2.Remove cabinet
Loosen the clasp fixing chassis;
remove the screws fixing the rear part
of cabinet and then pull out the unit.
Installation and Maintenance
Caution: pull out the power,discharge the
refrigerant completely before removal.
Procedure
air-inlet panel
filter
clasp fixing chassis
screw
41