Table of Contents
Advertisement
EVISTR VOICE RECORDER
http://blog.evistr.com
support-us@evistr.com
12) Press REC, it shows "OVER RECORD"
When press REC, it not records, it show "OVER RECORD", that means the voice recorder memory is
full, or you have too many "FOLDER" or "recordings" in the recorder.
Why this happened? Although you may not record too long time. Sometimes mistakenly RECORD,
and SAVE again and again, or copy or create too many "FOLDER" in the recorder disk. Maybe there is
some files that cannot be read by the recorder, so you cannot find directly from the recorder
So you need to format the voice recorder, or connect to computer and have a check, after that
format the recorder disk from your computer directly
13) Why it is only playing 10 seconds
This is because you have entered view playing playback mode, it will playback 10seconds of each file
At the status of playback, you could press M (menu), find Repeat, enter it
Select Repeat All or other mode, press M (menu), confirm your setting
14) Why it playback in random
issue 12, go to play setting, close the shuffle function
Same way to solve this issues as
15) How to use the A-B repeat function
During playback, press and hold M, you will see A on the screen, and B is blink, it selected the start
point
Press and hold M again, select point B
Now it will playback between Point A to B
The recording is noise
16)
Don't recording near computer, electric fans, air conditioner, sound bar that will easily cause noise,
the recorder will pickup this statics noise
17) The recorder auto shut down when I am recording
Why this happened? The sleeper time function is ON, when set this, no matter you are operating the
device, or recording or playing, it will force to shut down the device.
OFF
So you could go to System setting - > sleeper time, select
and confirm it. You will close the sleep
time function. In default, it was at zero.
Page - 23 - of -25 -
Hide quick links:
Advertisement
Table of Contents
